によって書かれた Falco eMotors Inc
1. To increase the Motor Power Level by 1, Click on upward direction button on screen (swap length should be more than 1 inch) when Motor is connected.
2. To decrease the Motor Power Level by 1, Click on downward direction button on screen (swap length should be more than 1 inch) when Motor is connected.
3. Display the Battery voltage in graphical form.(Minimum battery voltage should be 30v, if battery voltage goes below 30v it shows empty battery level in red color).
4. Display total Duration of time for which Falco Flash has been connected to Motor.
5. Display memory id,TS Id,Firmware of motor and turn on voltage .
6. You can broadcast,memory read or restore these motor values.
7. Provided current clamp settings for Assist or Regen mode with seek bar to each power level.
8. This option is available at top right corner displaying three vertical dots or hardware option menu depending on device.
9. You can broadcast,memory read and restore these values.
PcMac Store 
