Published by Falco eMotors Inc on 2024-10-29
eBike Lab 1.6 Overview
What is eBike Lab 1.6? The app is designed to control and monitor Falco motors. It allows users to increase or decrease the motor power level, connect and disconnect Falco Flash to any Falco motor, and have an emergency stop on the motor while running. The app displays the total duration of time for which Falco Flash has been connected to the motor, battery voltage, capacity, iWatts, WH/Miles, WH/Miles remaining, ODO (distance) meter, and motor temperature/power level. It also has a Torque Sensor Settings screen to adjust various parameters, a Power Configurator screen to set current clamp settings for Assist or Regen mode, and a Manufacturing Parameters screen to display memory ID, TS ID, firmware of the motor, and turn-on voltage. The app also has a Settings option to adjust motor ID settings, TS ID settings, CRM settings, device information, battery type, and sensor selection.
1. To increase the Motor Power Level by 1, Click on upward direction button on screen (swap length should be more than 1 inch) when Motor is connected.
2. To decrease the Motor Power Level by 1, Click on downward direction button on screen (swap length should be more than 1 inch) when Motor is connected.
3. Display the Battery voltage in graphical form.(Minimum battery voltage should be 30v, if battery voltage goes below 30v it shows empty battery level in red color).
4. Display total Duration of time for which Falco Flash has been connected to Motor.
5. Display memory id,TS Id,Firmware of motor and turn on voltage .
6. You can broadcast,memory read or restore these motor values.
7. Provided current clamp settings for Assist or Regen mode with seek bar to each power level.
8. This option is available at top right corner displaying three vertical dots or hardware option menu depending on device.
9. You can broadcast,memory read and restore these values.
Download and Install eBike Lab 1.6 - PC
Download for PC - server 1 -->
Pcmacstore.com 
